| 产品编号：Km-921 |
| 产品名称：硅烷改性树脂（MS树脂）KM-STP-S210 |
| Cas No.：611222-18-5 |
| 分子式：(C3H6O)nC10H24N2O7Si2 |
Description:
KM-STP-S210 is equivalent to Wacker GENIOSIL® STP-E10. It is alkoxy silane terminated polyether polymer. It could be applied in moisture curing elastic sealant, elastic structure sealant and sealing coatings. Sealants based on KM-STP-S210 not only have excellent adhesion properties, but also have adhesion to broad range of substrates. Different from polyurethane and silicone system, this formulation has no solvent and isocyanate, as well as no bubbles and odour generated from curing. It is especially suitable for construction industry, transportation industry and general industry application.
Properties and Features:
High Activity. Medium to high Modulus Good adhesion strength
Fast curing, no catalyst needed
Excellent aging and yellowing resistance
Excellent water resistance, resistance to chemical corrosion
Excellent elastic recovery rate
Excellent storage stability
Solvent free, odorless, eco-friendly
Could be blended with other Kemi-works polymers
Specification:
Appearance:Yellow liquid
Viscosity(25℃,mPa.s):10000-15000
Boiling Point: >250℃
Flash point : 230℃min
Density(g/cm3): About 1.0
Water-Soluble :Virtually Insoluble
Application:
KM-STP-S210 polymer used as base polymer in elastic sealants, elastic structure sealants, encapsulate adhesives and coatings. The curing mode of the polymer is moisture curing, it can be made into a single component or two- components system.
Industrial adhesive
Construction sealant
Personal DIY sealant
Eco-friendly decoration sealant
Storage:
Because this product is moisture sensitive, If unopened and stored at 4 ℃ -30℃ dry environment, the shelf life is 12 months. Use it as soon as possible if opened, the remain products should be resealed and stored at 4 ℃-30℃ dry environment. But if shelf life expired, you can still use it only after your positive confirmation of production performance.
Package:
50kg plastic drum , 200kg/Iron drum or 1000kg/IBC drum |
|
