I.. Product description:

It is oil-based, consists of two components  

1).Paint --- mixture of fluorine silicone modified resin, Nano materials, pigments, fillers, solvent and auxiliary agent etc.  

2).Curing agent

II.. Characteristics & Application:

Characteristic 1

1-1) Superior anti-adhesive and anti-graffity performance

1-2) Excellent low surface energy; coating film feel smooth, small friction resistance;

Application range

Used in wire poles, light poles, aluminum panels, stop sign, public telephone booth, Ads billboard, trash etc. on the road sides in the

urban areas and communities, in order to prevent graffiti phenomenon, beneficial for cityscape management

Characteristic 2

a).Excellent anti-aging----- accelerated aging 1000h, no powder, no cracks, no peeling on the coating film.

b).Excellent Chemical resistance --- resistance to water, acid, alkali, salt water and heat, especially salt spray resistance

Application range:

1, Used for building reconstruction and repair, protection and decoration of building exterior wall;

2, Used for bridges, petrochemical, pipelines, storage tanks, power plants, mining, steel etc., to improve durability, weatherability and

anti-corrosion of the coating material;

3, Used for anti-corrosion treatment on the surface of steel frame, building, fence, container, offshore platform in the acid-rain area and coastal

area;

4, Used for the protection of ancient building and culture relics.

Characteristic 3

Color diversity, FSi-012 provides various colors and gloss for choice, or adjust color as per the customer’s need.

Characteristic 4

Convenient for operation, FSi-012 can be dried at room temperature or mid-temp., applicable for various coating way, such as spray coating, roller coating, brush coating etc.

Characteristic 5

With good adhesion on variety of building substrates such as cement, masonry etc.

III.. Main technical index:

IV. Operation instructions:

1). Coating method ---- Spray, brush coating, roller coating

2). Theoretical paint consumption -- 5-7m2/Kg (one time)  (dry film thickness of 25μm)

3). Utility time -- Prepare paint, curing agent and solvent in regulated proportion,  let stand 20 minutes,  then use it up in 3hrs.

4). Surface treatment ---- Remove surface dust, dirt, grease and loose material, the surface should be dry, clean and firm, PH value of the concrete surface should <10, and It need coated sealer primer ,  metal surfaces should be treated, its roughness must be 40-80um and coated with matching primer.

5). Operation condition --- Coating temp. is 5-35’C,  the substrate material should be higher at least 3℃ above dew point, relative humidity should less than 85%.

6). Thinner: It should use our matching thinner. Reference usage is 10%-30%, the specific usage depends on actual use effect.

7). Recoating time: Minimum 2h, maximum 24h, It needs to be polished when repairing.

8). Full curing time (25℃): 168 hours.

9). Operation requirements:

a).Stir paint evenly before coating,

b).Then mix components A & B in strict proportion evenly, 

c).Add the appropriate amount of diluent to adjust viscosity according to the operation situation, stand for 10-20 minutes, stir evenly and run out in 3 hours, or else, paint will become gel, can not be used.

V. Packing:

Packing two-components separately, Paint A & Curing agent B.

10kg, 20kg, 150kg iron drum (N.W.)

VI. Storage & Shelf life:

Storage: Kept in cool, dry, ventilated place with good seal, away from fire;  

Shelf life: one year, expired paint still can be used if the test result is qualified.